Motor School

The main principle behind a Magnetic Gear Pump is the combination of positive-displacement gear pumping and non-contact magnetic torque transmission. Instead of using a conventional shaft seal to connect the motor to the pumping gears, permanent magnets transfer torque through a sealed containment barrier. As the gears rotate, they create expanding cavities at the inlet […]

The shape of the permanent magnets has a direct influence on PMSM motors because it determines how magnetic flux is distributed across the air gap. Parameters such as magnet arc width, thickness, curvature, segmentation, and magnetization direction affect average torque, cogging torque, torque ripple, back EMF, efficiency, vibration, and high-speed operating capability. A larger magnet

BLDC Motors are generally a better choice for efficient continuous rotation, compact designs, lower system cost, and applications that do not require extremely precise positioning. Servo motors are better for automation systems requiring accurate position control, high repeatability, fast acceleration, and closed-loop feedback. The key difference is that BLDC describes a motor technology, while servo

A BLDC motor can produce anywhere from 0.01 HP to over 500 HP, depending on its design, voltage, cooling method, and application. Typical power ranges include: BLDC Motor Type Power Output Horsepower Small cooling fan motor 5–100 W 0.007–0.13 HP Robotics motor 100–750 W 0.13–1 HP Industrial automation motor 750 W–5 kW 1–6.7 HP Electric

BLDC motors generate heat from copper losses, iron losses, bearing friction, and inverter switching losses. Effective cooling methods—including natural air cooling, forced-air cooling, liquid cooling, heat sinks, cooling fins, thermal interface materials, and intelligent thermal monitoring—help maintain winding temperatures below insulation limits, improve efficiency by reducing copper resistance, extend bearing life, and increase continuous torque

Correctly wiring BLDC Motors requires matching the motor phases (U/V/W) to the controller outputs, connecting the Hall sensor signals correctly (if equipped), supplying the controller with the proper DC voltage, and configuring controller parameters according to the motor specifications. Incorrect wiring can cause reverse rotation, excessive current, poor efficiency, vibration, overheating, or permanent damage to

Choosing between Sensorless vs Sensored BLDC Motors depends primarily on startup requirements, low-speed performance, positioning accuracy, and overall system cost. Sensorless BLDC motors estimate rotor position using back electromotive force, eliminating physical position sensors. They are simpler, lower in cost, highly reliable, and ideal for medium- to high-speed continuous operation. Sensored BLDC motors use Hall

Accurate PMSM motor parameter measurement is essential for motor control tuning, field-oriented control (FOC), efficiency optimization, and system commissioning. The most important parameters include stator resistance (Rs), d-axis and q-axis inductance (Ld/Lq), back EMF constant (Ke), flux linkage (ψPM), pole pairs (P), rotor inertia (J), and phase resistance balance. These parameters can be measured using

Selecting the correct BLDC motor voltage is one of the most important engineering decisions in any motion control system because it directly influences motor efficiency, torque production, current consumption, wiring size, controller selection, thermal performance, and overall system reliability. While there is no single “best” voltage suitable for every application, the ideal voltage depends on

Selecting the right gearbox is one of the most important decisions in mechanical power transmission. Although both Worm Gearbox and Planetary Gearbox are widely used across industrial automation, robotics, medical equipment, AGVs, and electric machinery, they deliver torque in very different ways. Many engineers focus only on torque ratings. In reality, torque capacity depends on